Filter
Top Products
37
MTS technology allows several audio signals to be broadcast at once, giving you a choice
in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP).
Press the MENU button
π†
To MTS
è
Select the mode
(The ON AIR arrow tells you if a broadcast is in stereo and/or contains an SAP).
Press the EXIT button when finished
Notes:
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
These settings allow you to change and adjust the sound on your television.
BASS –
You can increase or decrease the level of low-frequency sound in the TV’s audio with
the bass adjustment.
TREBLE –
Use treble to adjust the level of high-frequency sound in your TV’s audio.
BALANCE –
Adjust the level of sound between the TV’s left and right speakers with the
balance setting.
Press the MENU button
π†
To BASS, TREBLE or BALANCE
è
To adjust the setting
π†
To move to the next setting
Press the EXIT button when finished
Note:
• If you press the 0 button, you can reset the setting to the factory default setting.
Sound Adjust
Sound Settings
MTS (Multi-Channel Television Sound)
Adjust the Sound Settings
SOUND
ADJUST
PREVIOUS
BASS
TREBLE
BALANCE
MTS
SMART SOUND
NEXT PAGE
SELECT
BY
OPERATE BY EXIT BY
EXIT
STEREO SAP MONO
RESET BY
0
OFF
Smart Sound
Decreases high sound levels, giving a regulated sound level.
Press the MENU button
π†
To SMART SOUND
è
To turn ON or OFF
Press the EXIT button when finished
LCT1785-001A-A ENG 37 12/16/04, 2:38:45 PM