JVC AV 32F704 CRT Television User Manual


 
AV-36FA54, AV-32FA54, AV-27FA54 ONLY.
PIP displays two separate pictures on screen. Your television has 2-Tuner PIP, meaning you
can view pictures from two different channels simultaneously. A special set of PIP control
buttons are located on the upper part of the remote control. Descriptions of each button
appear on this page.
Turn PIP on by pressing the ON/MOVE button
ON/MOVE
Each press of ON/MOVE will shift the PIP window to a different corner and turn off.
Cable Box Note
The 2-Tuner PIP function may not operate when used with certain cable boxes. This is
because while some models of cable box may receive up to 181 channels, they may only
send the signal from one channel to your television (please also see diagram on page 12).
For the PIP tuner to operate correctly, it must have access to all available channels. Since
the television is receiving the signal of only one channel from the cable box, it is impossible
for the 2-Tuner PIP to display a second, different channel.
Because there are many different models of cable boxes in use today, if you are having
problems operating your PIP feature with your cable box, we recommend you contact your
local cable company for connection advice.
Button Functions
46
PIP Introduction
On/Move
















Note:
• You cannot select the component input in the PIP window.
• When you select the AUTO TUNER SETUP, CHANNEL SUMMARY, V-CHIP, the PIP window
turns off.
GJ English 4/24/03, 12:51 PM46