Filter
Top Products
Initial Setup
25
Auto Tuner Setup
The auto tuner setup function is described on page 18 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the MENU button
π†
To AUTO TUNER SETUP
è
To operate
è
To choose CABLE or AIR
†
To move to START
è
To start Auto Tuner Setup
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or prevent any unauthorized viewers from watching
any or all 181 channels.
Press the MENU button
π†
To CHANNEL SUMMARY
è
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an “¸”. You can
delete channels from the scan by removing the “¸”. If any
channels were missed during auto tuner setup and you
wish to add them, you may by placing an “¸” next to the
channel number.
π†
To the SCAN column
è
To include or delete from scan
Press the EXIT button when finished
You can block access to a channel by activating the channel lock.
Press the MENU button
π†
To CHANNEL SUMMARY
è
To operate
π†
To the Lock Column ( )
Press the ZERO button to lock or unlock that channel
Press the EXIT button when finished
AV-32\36D104\304 English 3/17/03, 9:25 AM25