JVC AV 48WP74 Projection Television User Manual


 
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,
rewind, pause, record, channel up/down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the
10 key pad.
4) Release the DISPLAY button, and confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond
to any of the codes, try the search codes function on page 24.
After you program your remote, some VCR buttons may not work properly. If so, use the
VCR’s remote.
• To record, hold down the R
EC button on the remote and press PLAY.
Remote Programming
VCR Codes
22
65,56,48WP74 English OK1 2/18/03, 1:45 PM22