Filter
Top Products
Initial Setup
28
Auto Tuner Setup
The auto tuner setup function is described on page 20 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the MENU button
π†
To AUTO TUNER SETUP
è
To operate
è
To choose CABLE or AIR
Press the OK button to start
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV.
You can add or delete channels from the line-up or prevent any unauthorized viewers from
watching any or all 181 channels.
Press the MENU button
π†
To CHANNEL SUMMARY
è
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an “”. You can
delete channels from the scan by removing the “”. If any
channels were missed during auto tuner setup and you wish
to add them, you may by placing an “” next to the channel
number.
π†
è
To the SCAN column
Press the OK button to include or delete from scan
Press the MENU button when finished
You can block access to a channel by activating the channel lock.
Press the MENU button
π†
To CHANNEL SUMMARY
è
To operate
π†
è
To the Lock Column ( )
Press the ZERO button to lock or unlock that channel
Press the MENU button when finished
Press the Menu button when finished
65,56,48WP74 English OK1 2/18/03, 1:45 PM28