JVC HD-56FH97 Projection Television User Manual


 
83
OSD Information
This OSD warning appears when the digital channel that you have selected is too weak to
receive or no signal is being detected for that channel.
Weak Signal
Weak Signal
15
Invalid Signal
If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen. It
appears when the input is PC and it is a single screen.
Note:
This message only appears for HD-56FH97, HD-61FH97, HD-70FH97, HD-56FN97,
HD-61FN97, HD-70FN97.
If the external input terminal you selected, or were watching is not receiving a signal, "NO
PROGRAM" appears on the television screen. It appears when that external input terminal
is not receiving a signal and you have the Noise Muting function OFF and you have a single
screen. It moves automatically every two seconds to prevent the screen from burn-in.
Note:
• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off
functions that you set, are still active.
No Program
LCT2067 Eng.indd 83LCT2067 Eng.indd 83 6/21/06 9:32:32 AM6/21/06 9:32:32 AM