JVC HR-S2902U VCR User Manual


 
6
Page 6 November 8, 2002 8:36 am
Language Setting
The default setting is ENGLISH.
A
Access Main Menu screen, then Initial
Set screen
Press MENU on the Remote. Press
rt
to
move the highlight bar (arrow) to INITIAL
SET, then press OK or
e
.
B
Select language
This VCR offers you the language choice to
view menus and some messages in
English, Spanish or French. Press
rt
to
move the highlight bar (arrow) to
LANGUAGE, then press OK or
e
repeatedly until the desired language is
selected.
Press MENU to return to normal screen.
Clock Setting
Perform clock setting only if the clock has not been set correctly
by the Plug&Play setting or if you use a cable box.
Preparations
A
Access Main Menu screen, then Initial
Set screen
Press MENU on the Remote. Press
rt
to
move the highlight bar (arrow) to INITIAL
SET, then press OK or
e
.
B
Access Clock Set screen
Press rt to move the highlight bar
(arrow) to CLOCK SET, then press OK or
e.
Setting clock semiautomatically
— Semiauto Clock Set
You can change the host channel/D.S.T. (Daylight Saving Time)/
time zone setting manually. First follow steps 1 to 2 in
Preparations above, then go to the following steps.
NOTE:
The time set previously will be erased when “AUTO CLOCK”,
“HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.
A
Set Auto Clock to ON
Press OK or
e
on the Remote repeatedly to
move the highlight bar to AUTO CLOCK,
then press
rt
so that ON is selected.
B
Select host channel
You can either select AUTO or enter a PBS channel number.
Press OK or
e
to move the highlight bar to HOST CH, then
press
rt
repeatedly until AUTO or the desired PBS channel
number is selected.
Some PBS channels do not transmit clock setting data.
C
Select D.S.T. mode
Press OK or
e
to move the highlight bar to D.S.T., then press
rt
repeatedly until the desired setting is selected.
AUTO
: Select if you want to adjust your VCRs clock
automatically by the incoming signal from the host
channel. (Auto Daylight Saving Time enables automatic
adjustment of the VCRs clock at the start and end of
Daylight Saving Time.) Be sure to select the correct time
zone manually in step 4
.
ON: Adjustment will be made by the built-in clock itself.
OFF: Select when Daylight Saving Time does not apply to you.
D
Select time zone
Press OK or
e
to move the highlight bar to TIME ZONE, then
press
rt
repeatedly until AUTO or the desired time zone is
selected. Each time you press the button, the time zone changes as
follows:
{
AUTO
{
ATLANTIC
{
EASTERN
{
CENTRAL
{
MOUNTAIN
{
PACIFIC
{
ALASKA
{
HAWAII
{
(back to the beginning)
E
Complete Semiauto Clock Set
Press MENU to return to normal screen. Turn off the VCR. Aut
will appear on the display panel while the clock is being set. The
current clock time will appear automatically when the clock
setting is complete.
Setting clock manually
— Manual Clock Set
First follow steps 1 to 2 in Preparations above, then go to the
following steps.
A
Set time, date and year
Press
rt
until the desired time appears,
then press OK or
e
. Set the date and year
in the same way.
Holding
rt
changes the time in 30-
minute intervals, or changes the date in
15-day intervals.
B
Select D.S.T. mode
Press OK or e to move the highlight bar to
D.S.T., then press
rt to select the
desired setting.
ON: Adjustment will be made by the
built-in clock itself.
OFF: Select when Daylight Saving Time
does not apply to you.
C
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or
e
repeatedly until the item you want to change
blinks, then press
rt
.
Initial Settings
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
Language selection will be reset to ENGLISH after a power
failure occurs.
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
CLOCK SET
TIME DATE YEAR
AUTO CLOCK : ON
HOST CH : AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO
Selections of host channel and D.S.T. mode will be reset to
AUTO after a power failure occurs.
Manual setting of the clock will be lost after a power failure
occurs.
CONTINUED ON NEXT PAGE
HR-S2902U-EN-1.fm Page 6 Friday, November 8, 2002 8:37 AM