JVC HR-S4800U VCR User Manual


 
12
EN
INITIAL SETTINGS (cont.)
5
Set date
On the front panel:
Press CH5∞ until the desired date appears, then
press OK.
On the Remote:
Press SHUTTLE PLUS %fi until the desired date
appears, then press OK or SHUTTLE PLUS
#
.
c Holding CH 5∞ or SHUTTLE PLUS %fi
changes the date in 15-day intervals.
6
Set year
On the front panel:
Press CH5∞ until the desired year appears, then
press OK twice.
On the Remote:
Press SHUTTLE PLUS %fi until the desired year
appears, then press OK or SHUTTLE PLUS
#
twice.
7
Select D.S.T. mode
You can select either “ON” or “OFF”.
ON Adjustment will be made by the built-in
clock itself.
OFF Select when Daylight Saving Time does
not apply to you.
On the front panel:
Press CH5∞ to select the desired setting.
On the Remote:
Press SHUTTLE PLUS %fi to select the desired
setting.
8
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or SHUTTLE PLUS
#
repeatedly until the item
you want to change blinks, then press CH 5∞ or
SHUTTLE PLUS %fi.
CLOCK SET
TIME DATE YEAR
– –:– –AM 1/ 1 00
AUTO CLOCK: ON
HOST CH : AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS (5,), THEN (OK)
PRESS (MENU) TO END
1
3
8
4 7
4 7
Setting clock manually
— Manual Clock Set
First follow steps 1 to 3 on page 10, then go to the
following steps.
4
Set time
On the front panel:
Press CH5∞ until the
desired time appears,
then press OK.
On the Remote:
Press SHUTTLE PLUS
%fi until the desired time
appears, then press OK or SHUTTLE PLUS
#
.
c Holding CH 5∞ or SHUTTLE PLUS %fi
changes the time in 30-minute intervals.
c When the time is entered manually, “AUTO
CLOCK” is automatically set to “OFF”, and
“HOST CH” and “TIME ZONE” disappear.
4 7
VIDEO (MONO)L—AUDIO—RS-VIDEO
MENU
OK
CH
S-VHS ET
FF
REW
POWER
SPEP
VCR
REC PAUSESTOP/EJECT
PLAY
8
4 7
HR-S4800U/S3800U-EN01-20 00.1.31, 9:55 AM12