JVC LT-17X576 Flat Panel Television User Manual


 
18
INITIAL SETUP
Refer to “Using the TV’s menu” (see page 14) for details of
displaying the menu.
LANGUAGE
The language in which you want the onscreen menus to
appear.
/
/
2
he and buttons to choose the
ress
t
1
he buttons to choose the CHANNEL
SUMMARY and press to OPERATE.
ress
t
P
1 Select TUNER MODE and press the buttons
to switch AIR/CABLE
2 Select START and press the button to
start channel programming.
/
/
that you want. Then press 0 button to lock or
In auto tuner setup, the TV automatically scans through all
Select LANGUAGE and press the buttons
to choose the language.
/
ENG/FRAN/ESP/
AUTO TUNER SETUP
available channels.
CHANNEL SUMMARY
CH NO. SCAN
01
02
03
04
05
06
07
08
09
10
CH NO. SCAN
11
12
13
14
15
16
17
18
19
20
:SELECT
OK : OPERATE
After scanning, the CHANNEL SUMMARY menu appear,
and the channel with program signal will be marked by
mark .
CHANNEL SUMMARY
CH NO. SCAN
01
02
03
04
05
06
07
08
09
10
CH NO. SCAN
11
12
13
14
15
16
17
18
19
20
:SELECT
OK : OPERATE
CHANNEL
SU
MMARY
CH NO. SCAN
01
02
03
04
05
06
07
08
09
10
CH NO. SCAN
11
12
13
14
15
16
17
18
19
20
: SELECT
OK : OPERATE
/
to enable or disable the channel by mark .
You can delete channels from the scan by removing the
" ". If any channels were missed during auto setup and
you wish to add them, you may by placing an " " next
to the channel number.
: SELECT
INITIAL SETUP
LANGUAGE ENG/FRAN/ESP/
AUTO TUNER SETUP
OK : OPERATE
CLOSED CAPTION
V-CHIP
SET LOCK CODE
CHANNEL SUMMARY
ʒᄾ
AUTO TUNER SETUP
TUNER MODE CABLE
: SELECT
: OPERATE
START
CHANNEL SUMMARY
խ֮
When a viewer attempts to watch a blocked channel, this
message appears:
NO. - - - -
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
To watch a channel that you have locked, enter the Lock
Code using the 10 key pad. If the wrong code is entered,
Channel Guard Message
the message "INVALID LOCK CODE!" will flash on
screen.
The channel cannot be accessed until the correct lock code
is entered.
Once a channel has been locked, it will remain unlocked
See also "SET LOCK CODE", page 20.
NOTE :
until the television is turned off.
P
/
/
3 Press the and buttons to choose the
unlock channel by mark.
CHANNEL that you want. Then press OK button
/