JVC PD-42V475 Flat Panel Television User Manual


 
33
Initial Setup
Auto Tuner Setup
The auto tuner setup function is described on page 25 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M
ENU button
π
To AUTO TUNER SETUP
®
To operate
®
To choose CABLE or AIR
Press the OK button to start
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or set the channel label as you like or prevent any
unauthorized viewers from watching any or all 181 channels.
Press the MENU button
π
To CHANNEL SUMMARY
®
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an “”. You can
delete channels from the scan by removing the “”. If any
channels were missed during auto tuner setup and you
wish to add them, you may by placing an “” next to the
channel number.
π
®
To the SCAN column
Press the O
K button to include or delete from scan
Press the M
ENU button when finished
Press the Menu button when finished
AUTO TUNER SETUP
CABLE
PRESS TO START
SELECT OPERATE EXIT
MENU
TUNER MODE
OK
CHANNEL SUMMARY
06
07
08
09
10
CHNO.
SELECT OPERATE EXIT
MENU
01
02
03
04
05
OK
SCAN CHNO. SCANID ID
MTV
A&E
E!
HBO
L
PD-42V485\475 Eng 33 5/21/04, 9:57:25 AM