JVC LPT0421-001B VCR User Manual


 
EN 21
123
456
7
89
0
1
2
4
3
SET TAPE SPEED
6
Press SP/LP/EP ( ) to set the tape speed.
RETURN TO NORMAL
SCREEN
7
After confirming all information is correct, press PROG
or OK. "PROGRAM COMPLETED" appears on the
screen for about 5 seconds, then normal screen
appears.
Repeat steps 1 7 for each additional programme.
ENGAGE RECORDER'S
TIMER MODE
8
Press
. The recorder turns off automatically and ""
appears on the display panel.
To disengage the timer, press
again.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 7, press WEEKLY (NUMBER
key "9") for weekly serials or DAILY (NUMBER key "8") for daily
serials (Monday–Friday). Either "WEEKLY" or "DAILY" appears on
the screen. Pressing the button again makes the corresponding
indication disappear.
At the programme check screen
When the weekly serials are programmed, a day of the week
appears. When the daily serials are programmed, "DAILY"
appears.
NOTE:
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes (
pg. 22).
WEEKLY
DAILY
PROG
SP/LP/EP
OK
SP/LP/EP