Filter
Top Products
Filename [DVS3EU_2-EN.fm]
Masterpage:Left
42
EN
Page 42 October 8, 2001 2:37 pm
TIMER RECORDING (cont.)
Check, cancel and change programmes
A
Disengage the timer mode.
Press
#
(
TIMER
), then press
1
.
B
Access the Programme Check screen/display.
C
Access the Programme screen/display.
The front display panel shows the programme start time. Pressing
OK
changes the display to the programme stop time, then the
date and the channel position.
To cancel or change a programme...
D
Cancel or change a programme.
Press
&
to cancel a programme. To change programme
settings, press the appropriate button:
START+/–
,
STOP+/–
,
DATE+/–
,
PR+/–
,
VPS/PDC
and/or
SP/LP
(
p
).
● You can change “TV PROG” to “SAT” for the channel position
by pressing the
number key
“
0
”.
E
Return to the normal screen/display.
Press
"
as many times as necessary. If there are still
some programmes remaining, go to step
6
.
F
Return to the timer mode.
Press
#
(
TIMER
).
NOTE:
You can also check the programmes on the front display panel
even if the recorder’s power is off (unless the recorder is in the
Power Save mode
੬
pg. 69) or the recorder is in the Timer
mode; however, it is not possible to cancel or change the
programmes.
Press
"
.
● The Programme Check screen
or display appears for the deck
(VHS or DV) being selected.
123
456
789
1
2
1
2
3
0
3
4
4
Press
"
again to check
more information. Each time
you press
"
, the next
programme’s information
appears.
DVS3EU_2-EN.fm Page 42 Monday, October 8, 2001 2:43 PM