JVC LT-15B60SE Flat Panel Television User Manual


 
ENGLISH - 12 -

Programme Selection (Previous or next
programme)
 Press 
 button to select the previous
programme.
 Press 
 button to select the next
programme.
Programme Selection (direct access)
Press digit buttons on the remote control to
select programmes between 0 and 9. TV will
switch to the selected programme. To select
programmes between 10 - 99, press the digit
buttons consecutively which programme you
want to select (eg. for programme 27, first
press 2 and then 7). When it is late to press
second digit button only the first digit
programme will be displayed. The limit of the
delay time is 3 seconds.
Example: PR6 press 6
PR12 press 1 and 2
Press directly the programme number to
reselect single digit programmes.
Hint: The channel list numbers are assigned by the broad-
casters. Because not all channels are broadcast free-to-air
and stored by the receiver, the channel list numbers do not
run continuously. The fifteenth channel in the list, for ex-
ample, may not be channel number 15 but channel number
17.
Menu System
Your TV has been designed with a menu sys-
tem to provide an easy manipulation of a multi-
function system. The TV is controlled by choos-
ing the commands, which are displayed on
the screen.
Press the MENU button. The menu will be
displayed in the middle of the screen.
Press 
 or   button to select a menu title
and then 
 or   button to select a menu
item. Press   /   or OK buttons to enter
the menu item.
In AV modes, menus appear the same as in
TV mode except the Installation menu.
 Press the MENU button again to remove
menu.
 Press the BACK button to return to the pre-
vious menu.
Picture Menu
By pressing   or   button, select the first
icon. Picture menu appears on the screen.
Setting Mode
 As you enter the picture menu, Mode will be
the first item.
 By pressing 
 or   button you may
choose one of these options:
Manual, Bright, Standard and Soft.
Bright, Standard and Soft modes are all pre-
set. When these modes are selected Con-
trast, Bright-1, Sharpness and Colour can
not be changed. They can only be changed
when Manual is selected as a picture mode.
01-ENG-1525-17MB18-1861UK_15B60SE.p65 30.06.2005, 15:0912