Filter
Top Products
ENGLISH - 18 -
Blue Back (During No Signal)
The Blue Back Feature can be set by
or
button to either On or Off.
To Store Settings
In Feature menu all settings are stored auto-
matically.
Install Menu
Press MENU button, now you are in main
menu. In the main menu, select Install
using
or button. Then enter the In-
stall menu pressing / or OK but-
ton.
In EXT mode, Install menu appears like this:
You can change only Colour system and
VCR.
Selecting Programme
Using
or button select Programme.
To select programme number, you can use
/ button or Digit Buttons
Selecting Band
Band, can be chosen either,
C or S by
or button.
Selecting Channel
Channel can be changed by or but-
ton or by Digit Buttons.
Selecting Colour System
Using
or button on Colour System,
you can change the colour system to PAL,
SECAM or Auto.
Note: In EXT mode, you can choose NTSC
3.58 and NTSC 4.43 as well.
Selecting Sound System
Using
or button on Sound System,
you can change the standard to BG, DK, I, L,
Lp.
Selecting Fine Tuning
You can use the Fine Tuning process for fine
adjustment (after coarse adjustment), if you
are not happy about the image on the screen.
Use
or button on Fine Tuning item,
until getting the best image on the screen.
Selecting Search
To start the search process, press
button
for forward search or button for backward
search. If a signal is found or reaches to end
of the band after searching, press
or
buttons to continue search process. To stop
the search process when you want, press
or buttons at any time.
Decoder(EXT-2)
You can use this mode to connect any de-
coder to your TV.
Press the
or buttons to set it On or
Off.
When you select Decoder(EXT-2) On,
EXT-2 output will be chosen as TV mode only
and any scrambled channels will be un-
scrambled through decoder connected your
TV via EXT-2 output.
Setting VCR (Video Cassette Recorder )
Mode
This item can be seen in TV, EXT-1, EXT-2,
EXT-3 and EXT-4 modes.
01-ENG-1724W-17MB08P-1860UK-(LT-17C50BU&SU)-50058334.p65 18.11.2004, 14:1018