Filter
Top Products
- 16 -
When you press the following buttons ( / I,
, TV / DTV, ZOOM, , , AV, MENU,
SUBTITLE, GUIDE,
, BACK, / ,
number buttons) during recording, a mes-
sage appears asking if you want to stop
recording or not. Press OK button to stop
recording or BLUE button to continue re-
cording.
Do not turn the TV off in the following
cases:
When recording images from an external
device connected to TV (For example
camcorder).
When recording a TV channel after it has
been unscrambled on a decoder.
When recording a TV channel by using the
TVs output because the VCRs own tuner
can not properly receive that channel.
When recording Digital terrestrial broadcast-
ing (DVB-T).
TV autopower on/VCR image view:
When the VCR starts playing, the TV auto-
matically turns on and images from EXT-2
appear on the screen.
This function does not happen if your TVs
main power is turned off. Set your TVs main
power to on (StandBy Mode).
Basic Operations
You can operate your TV using both the re-
mote control and TV buttons.
Operation with the buttons on the
TV
Volume Setting
Press
- button to decrease volume or
+ button to increase volume, so a vol-
ume level scale (slider) will be displayed at
the middle of the bottom on the screen.
Programme Selection
Press
button to select the next pro-
gramme or button to select the previ-
ous programme.
Switching input mode
Pressing TV/AV/OK button will change the
input mode.
Entering Main Menu
Press MENU button to enter Main menu. In
the Main menu select submenu using
or button and enter the sub-
menu using - / + or TV/AV or
MENU/OK button. To learn the usage of the
menus, refer to the Menu System sections.
Operation with Remote Control
The remote control of your TV is designed to
control all the functions of the model you se-
lected. The functions will be described in ac-
cordance with the menu system of your TV.
Functions of the menu system are de-
scribed in following sections.
Volume Setting
Press
+ button to increase volume.
Press - button to decrease volume. A
volume level scale (slider) will be displayed
in the middle at the bottom of the screen.
Programme Selection (Previous or next
programme)
Press button to select the previous
programme.
Press
button to select the next
programme.
Programme Selection (direct access):
Press digit buttons on the remote control to
select programmes between 0 and 9. TV
will switch to the selected programme. To
select programmes between 10 - 99, press
the digit buttons consecutively which
programme you want to select (eg. for
programme 27, first press 2 and then 7).
When it is late to press second digit button
only the first digit programme will be dis-
played. The limit of the delay time is 3 sec-
onds.
ENG-20710W-17MB16P-1895UK-(LT-20DA6SK)-50076128.p65 18.10.2005, 08:3916