ENGLISH - 14 -
3
Programme Selection (Previous or next
programme)
Press
button to select the previous
programme.
Press button to select the next
programme.
Programme Selection (direct access):
Press digit buttons on the remote control hand-
set to select programmes between 0 and 9.
TV will switch to the selected programme. To
select programmes between 10 - 99, press
the digit buttons consecutively which
programme you want to select (eg. for
programme 27, first press 2 and then 7). When
it is late to press second digit button only the
first digit programme will be displayed. The
limit of the delay time is 3 seconds.
Example: PR6
press 6,
PR12 press 1and 2
Press directly the programme number to
reselect single digit programmes.
Hint: The channel list numbers are assigned by the broad-
casters. Because not all channels are broadcast free-to-air
and stored by the receiver, the channel list numbers do not
run continuously. The fifteenth channel in the list, for ex-
ample, may not be channel number 15 but channel number
17.
Menu System
Your TV has been designed with a menu sys-
tem to provide an easy manipulation of a multi-
function system. The TV is controlled by choos-
ing the commands, which are displayed on
the screen.
MAIN MENU
Press the MENU button. The main menu will
be displayed in the middle of the screen.
To select a sub-menu use or but-
ton, and press or button or directly
press OK button.
In EXT-1, EXT-2, EXT-3 and EXT-4 modes,
main menu appears the same as in TV mode
but without Program sub-menu.
Menu does not disappear automatically if it is
left on the screen.
Press the MENU button again to remove
menu.
Press the BACK button to return to the pre-
vious menu.
Picture Menu
Press MENU button, now you are in main
menu. In the Main menu, select Picture us-
ing or button, then enter the Picture
menu by pressing / or OK button.
Setting Mode
As you enter the picture menu, Mode will be
the first item.
By pressing or button you may
choose one of these options:
Soft, Standard and Bright.