Filter
Top Products
47
IMPORTANT! PREPARE USE
SETTINGS
TROUBLE?
Problem Actions
page
46
37
-
Unnatural colour >>> Adjust COLOUR and BRIGHT-1.
Check your COLOUR SYSTEM.
Noise >>> Set to the following functions.
PICTURE MODE : STANDARD
DIGITAL VNR : AUTO (HIGH)
Super DigiPure : MIN
Dull picture >>> Set to the following functions.
PICTURE MODE : BRIGHT
DIGITAL VNR : MIN
Super DigiPure : MAX
Poor picture quality
37
44
37
44
44
37
44
44
If you connected S-Video output device, check the
“S-IN” setting.
If the top of the image is distorted, check the video
signal quality itself.
If movement appears unnatural when receiving a signal
from a DVD player, etc. with 625p (progressive-scanning),
change the output setting of the external device to 625i
(interlace-scanning).
Strange picture
when using an external
device
27
-
-
Basics Picture
When a media card is inserted into the TV, remove the card
fi rst. Then, unplug TV, several minutes later plug it in again.
Remote control
stops working
-
Press to return to your settings.
Aspect ratio changes
unintentionally
20
Hold down and on the TV
simultaneously to restart.
DTV screen is frozen
-
Is the ATV reception poor, too?
Following the instructions in "Severe noise or snow"
can solve this problem.
Is there a DTV transmission tower nearby?
Turn "ATTENUATOR" to "ON", since the radio waves
are too strong.
There may be problems at the antenna, radio waves,
or the area you live in, where reception is bad.
Consult your retailer.
Not displayed
(black screen)
Screen
It is not a malfunction. Some functions (dark background)
in the menu do not work depending on the situation.
Some functions
do not work
-
LCD panels use fi ne dots ("pixels") to display images.
While more than 99.99% of these pixels function properly,
a very small number of pixels may not light,
or may light all the time.
Please understand that this is not a malfunction.
Black or white dots
appear on the screen
-
LT-37DM6ZJ.indb 47LT-37DM6ZJ.indb 47 9/13/2005 1:27:44 PM9/13/2005 1:27:44 PM