![](http://pdfasset.owneriq.net/9/c7/9c7f33e6-5a86-41c7-b171-16dd864b41c9/9c7f33e6-5a86-41c7-b171-16dd864b41c9-bg7.png)
7
Warnings
Disconnecting the stand
If you disconnect the stand, attach the bottom cover and the screw (supplied) into the hole.
1) Place the TV face down on a soft cloth on a table.
2) Remove the four screws from the back of the TV.
3) Pull out the stand from the TV.
4) Cover the hole with a bottom cover and tighten the screw.
Note:
• To re-install the stand, reverse the procedure from 4) to 1).
LCT2224-001C-A English.indd 7LCT2224-001C-A English.indd 7 4/13/07 9:28:08 AM4/13/07 9:28:08 AM