Filter
Top Products
7
Initial settings
When the TV is first turned on, it enters the initial setting
mode. Follow the
instructions on the on-screen display to
make the initial
settings.
1 Make sure to set the VCR/TV/DVD switch to the
TV position.
• You cannot turn the TV on when the VCR/TV/DVD
switch is set to the VCR or DVD position.
2 Press the button on the remote control
After a short interval the power lamp changes from red
• Check that the AC plug on the power cord from the
TV is connected to AC outlet.
4
he buttons to choose the
LANGUAGE.
The on-screen display will then be in English.
country where you are.
3 AUTO PROGRAM menu appears.
The AUTO PROGRAM menu appears and received TV
channels are automatically stored in the programme
numbers.
• To cancel the AUTO PROGRAM function:
Press the MENU button.
After the TV channels have been registered in
the programme numbers, the PROGRAM
menu appears
• If you want to, you can now edit the programme
numbers using the PROGRAM function.
For details, see “To edit the PROGRAM menu” on
page 21.
VCR/TV/DVD
Switch
Yellow button
Blue but
OK
ton
Power lamp
Remote control
ress
t
P
sensor
5
he buttons to choose the ENGLISH.
ress
t
/
P
/
6
he and buttons to choose the
ress
t
.
/
P
/
7
he buttons to choose the
ress
t
P
A.P.S.
A.P.S.
A.P.S. IS RUNNING
MENU : EXIT
BACK
to green.
/
Remote control
sensor
AUTO PROGRAM
LANGUAGE ENGLISH
COUNTRY UK
A .P .S
:
SELECT
:MOVE
8
Press the OK button to start A.P.S.
OK : START
A.P.S.
START
/
Then press buttons.