JVC LT-26DR7SJ Flat Panel Television User Manual


 
8
9
CAM
IMPORTANT! PREPARE USE
SETTINGS
TROUBLE?
Basic connections
200mm
50mm150mm 150mm 50mm
Power requirements
Connect the power cord only to a 220-240V, 50Hz
AC outlet.
When attaching the TV to the wall, use the
optional JVC wall mounting unit
Consult a qualified technician.
See the included manual on mounting procedures.
JVC assumes no responsibility for damage due to
improper mounting.
200mm × 200mm mount which conforms to VESA
standards.
Installation requirements
To avoid overheating, ensure the unit has ample
room.
Please read the user manuals of each device carefully before setup.
It is necessary to connect an aerial to watch TV.
Connect with other devices “Connecting external devices” (P. 10)
Care when setting Watch pay-per-view
Contract with a broadcasting company beforehand.
1 Unplug the power cord
2 Insert the Viewing Card into the CAM.
3 Insert the CAM.
4 Plug the power cord, and turn the power on.
Set pay-per-view (P. 40)
The CAM and Viewing Card will be sent by the broadcasting
company after contracting with them.
Connect the aerial
After all the connections have been made, insert the plug into an AC outlet.
AERIAL
VCR / DVD recorder
After all the connections have been made, insert the plug into an AC outlet.
Connect “T-V LINK” compatible recording device to “EXT-2”.
“T-V LINK” “What is “T-V LINK”?” (P. 12)
EXT-2
Connect a VCR / DVD recorder
AERIAL
EXT-1
Viewing
Card
Conditional
Access
Module
8-9 3/6/2006 1:24:53 PM