Filter
Top Products
Additional preparation
43
ENGLISH
LT-Z32/26SX4B/S / LCT1732-002A / English
Connecting headphones
Connect the headphones with a stereo mini-
jack (3.5 mm diameter) to the headphone
jack.
• No sound comes from the TV speakers
when the headphones are connected.
TV output from the OUT terminal
The video/sound signal of a TV channel you
are viewing is always output from the OUT
terminal.
• No signal will output through the S VIDEO
terminal when you are not viewing images
coming from the S VIDEO input. In this
case, use the VIDEO terminal instead of
the S VIDEO terminal.
• Changing over a programme number (PR)
also changes over the TV output from the
OUT terminal.
• When using the VIDEO-1 COMPONENT
Y Pb/Cb Pr/Cr terminal input, VIDEO-3
COMPONENT input or PC IN input, the
sound signal is output from the OUT
terminal but the picture signal is not
output.
• Teletext programmes cannot be output.
Connecting speakers/amplifier
While referring to the audio equipment
connection diagram, connect the audio
equipment you want to the TV.
You can use external front speakers to listen
to the TV sound instead of the TV speakers.
Before connecting anything:
• Read the manuals provided with the
amplifier and speakers.
• Turn the TV and amplifier off.
• To prevent magnetism from the speakers
adversely effecting the TV screen, use
magnetic-shielded speakers for the front
speakers.
• Note that connecting cables are not
supplied.
• The output from the OUT terminal is not
interrupted by headphone connection to
the TV. You cannot cut the sound from
the front speaker even if you connect a
headphone to the TV.
• Adjust the volume of the external
speakers with the amplifier.
IN
IN
L
R
without terminal covers
1 Amplifier
2 External speakers (Magnetic-shielded type)
LT-Z32&26SX4BS_Eng.book Page 43 Monday, September 6, 2004 10:30 AM