JVC PD-42B50BU, PD-35B50BU, PD-42B50BJ, PD-35B50BJ CRT Television User Manual


 
SET UP menu
41
ENGLISH
PD-42/35B50BU/BJ / LCT1617-001A-U / English (EK)
When the COUNTRY setting is not
FRANCE, use a two-digit CH/CC
number. When the COUNTRY setting is
FRANCE, use a three-digit CH/CC
number.
INSERT
1 Press the 6 buttons to choose a
programme number (PR) for which
you will register a new TV channel
2 Press the green button and start
the INSERT function
To cancel the INSERT function:
Press the b button.
3 When the COUNTRY setting is
UNITED KINGDOM:
Press the number buttons to enter
the remaining CH number
You cannot enter CC numbers.
When the COUNTRY setting is not
UNITED KINGDOM:
Press the 6 buttons to choose
“CH” or “CC”, then enter the
remaining CH or CC number
When the COUNTRY setting is
FRANCE:
Choose “CH1”, “CH2”, “CC1” or “CC2”.
The TV shifts to registration mode.
When the registration is completed, the
picture of the TV channel appears on the
screen.
The CH/CC number is a number given
to each broadcast frequency that
carries a TV channel. If the TV cannot
detect the TV channel corresponding
to the broadcast frequency indicated
by the CH/CC number, a “no-signal”
picture appears.
MANUAL
1 Press the 6 buttons to choose a
programme number (PR) for a new
TV channel
2 Press the blue button to activate
the MANUAL function
To cancel the MANUAL function:
Press the b button.
When the COUNTRY setting is not
UNITED KINGDOM:
At the right side following the CH/CC
number, the SYSTEM (broadcasting
system) of the TV channel appears.
3 When the COUNTRY setting is
UNITED KINGDOM:
Continue to step 4
When the COUNTRY setting is not
UNITED KINGDOM:
Press the 3 button to choose the
SYSTEM (broadcasting system) for
a TV channel you want to register
TV channel (SECAM-L system)
from a French station:
Set the SYSTEM to “L”. If it is set to one
other than “L”, you cannot receive the TV
channel of the SECAM-L system.
Other TV channels:
If you do not know the correct
broadcasting system, set the SYSTEM to
“I”. If “I” is not correct, you will not hear
the sound normally when the TV detects a
TV channel. In this case, retry to set the
SYSTEM correctly so that no problem
arises.
D0034-EN
> EDIT
CH/CC
PR ID
AV
01
02
03
04
05
06
07
08
09
CH/CC
BBC1
31
CH/CC
CH/CC 31
09
CH/CC 32
OK
CH/CC
D0035-EN
> MANUAL
CH/CC
PR ID
AV
01
02
03
04
05
06
07
08
09
CH/CC
BBC1
31
CH/CC
32
OK
CH/CC 31
SYSTEM
FINE+
FINE-
SEARCH+
SEARCH-
(
B / G
)
PD-42&35B50BUBJ(EK)_Eng.book Page 41 Monday, March 29, 2004 11:32 AM