Filter
Top Products
8
Warnings
The TV comes with front and rear pedestal (included). If you choose to mount the TV to a
wall or utilize JVC optional (sold separately) TV stand model RK-CSLM8, or wall mounting kit
TS-CP01WG, you will not need the pedestal but should keep it for possible future use.
If you do not utilize TV stand model RK-CSLM8, the front and rear pedestal MUST be attached
to prevent injury. If the TV sits fl ush against the wall, only the front pedestal MUST be attached.
To attach the front and rear pedestal.
1) Clear a fl at, soft area on which to lay the TV on it's back. Two
people can gently lay back the TV. Please use extra care as
any shock or impact may damage the TV. (Do not lay it on it's
front to avoid damaging the screen.)
2) Remove the front pedestal from its box and
place it over the screw holes on the bottom
of the TV. All the holes should match up
perfectly. Tighten 8 Phillips type screws
(included) into the holes marked.
3) Gently return the TV to an upright position. Please attach the
rear pedestal after you attach the front pedestal. If you attach
the rear pedestal fi rst, you may break the pedestal when you
attach the front pedestal.
Note:
• If the TV sits fl ush against the wall, you do not need to attach the rear pedestal.
7) Attach the cover again.
6) Tighten 6 Phillips type screws (included) into the holes.
4) Remove rear pedestal from it's box and slide the rear pedestal
as shown, under the TV and into the proper position.
5) Remove the cover on the rear pedestal towards the upper part.
LCT2172-001B-A English.indd 8LCT2172-001B-A English.indd 8 12/18/06 3:27:17 PM12/18/06 3:27:17 PM