JVC RM-C1258G CRT Television User Manual


 
16
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose
AUTO, see auto clock set above.
®
To choose MANUAL
To TIME
®
To set the hour
To minute
®
To set the minute
To START CLOCK
Manual Clock Set
Note:
You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Before you use any of your TV’s timer functions, you must first set the clock. You may precisely
set your clock using the XDS time signal broadcast by most public broadcasting stations. If you
do not have this in your area, you will have to set the clock manually. See manual clock set
below. To set the clock using the XDS signal:
®
To choose AUTO
To TIME ZONE
®
To select your time zone:
(Atlantic, Eastern, Central, Mountain, Pacific,
Alaska or Hawaii)
To move to D.S.T. (Daylight Savings Time)
®
To turn D.S.T. ON or OFF
To NEXT (To Auto Tuner Setup)
Notes:
• D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.
• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts
your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in
October.
You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Auto Clock Set
(To be continued...)
Quick Setup Plug-In Menu
INTERACTIVE PLUG IN MENU
>
SET CLOCK
START CLOCK
SELECT
BY
OPERATE BY
EXIT BY
EXIT
MODE
TIME
MANUAL
TIME ZONE
D.S.T.
PACIFIC
OFF
––:–– ––
INTERACTIVE PLUG IN MENU
>
SET CLOCK
MODE
TIME
AUTO
NEXT
SELECT
BY
OPERATE BY
EXIT BY
EXIT
TIME ZONE
D.S.T.
PACIFIC
OFF
––:–– ––
LCT1785-001A-A ENG 16 12/16/04, 2:38:36 PM