Filter
Top Products
– 14 –
Programming the Playing Order of the Tracks
—Program Play
You can arrange the order in which the tracks play before you
start playing. You can program up to 20 tracks.
• To use Repeat play (see page 15) for Program play, press
PRESET UP/REPEAT after starting Program play.
• There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step 2 again.
1
Load CD.
• If the current playing source is not the CD player, press
CD/RANDOM before going to the next step.
2
Press PROGRAM/SET.
The PROG indicator flashes on the display.
• If a program has been stored in memory, the program is
called up.
3
Select a track from the CD.
Press 4 or ¢ to select the
track number.
On the remote control ONLY:
Press the number buttons.
• For how to use the number buttons, see
“To go to another track directly using
the number buttons” on page 13.
4
Press PROGRAM/SET.
5
Repeat steps 3 and 4 to program other tracks
if you want.
6
Press 3¥8 while the PROG indicator
flashes.
The tracks are played in the order you have
programmed.
• If the PROG indicator goes off before you press 3/8,
press PROGRAM/SET, then press 3/8 to start
playback.
Continued
P
R
E
S
E
T
U
P
/
R
E
P
E
A
T
P
R
O
G
R
A
M
/
S
E
T
N
W
O
D
T
E
S
E
R
P
O
R
T
N
I
CD
PROG
P
R
E
S
E
T
U
P
/
R
E
P
E
A
T
P
R
O
G
R
A
M
/
S
E
T
N
W
O
D
T
E
S
E
R
P
O
R
T
N
I
To stop during play, press 7.
The PROG indicator goes off from the display and the unit
exits from Program play. (The program you have made is
stored in memory until you erase the program.)
To check the program contents
Before playing, you can check the program
contents by pressing PROGRAM/SET.
• Each time you press the button, the
programmed tracks are shown on the
display.
To add tracks in the program
1
Press PROGRAM/SET repeatedly to show the last
programmed track.
2
Press PROGRAM/SET repeatedly unit “00” appears as
the track number.
3
Enter the track number(s) you want to add by repeating
steps 3 and 4 on the left.
To edit the program
1
Press PROGRAM/SET repeatedly to show the program
number you want to edit.
2
Enter the track number you want by following steps 3 and
4 on the left.
To erase the entire program before or after play
1
Press PROGRAM/SET.
The PROG indicator flashes on the display.
2
Press 7.
• Ejecting a CD will also erase the entire program.
If you cannot enter a track number
You are trying to program a track number that does not
exist on the CD (for example, selecting track 14 on a CD that only
has 12 tracks).
After you have programmed 20 tracks
The program number returns to “P-01.” Programming
more tracks overwrite the tracks already programmed to those
numbers.
CD
PROG
P
R
E
S
E
T
U
P
/
R
E
P
E
A
T
P
R
O
G
R
A
M
/
S
E
T
N
W
O
D
T
E
S
E
R
P
O
R
T
N
I
EN13-16_PC-X290[B]_f.p65 04.4.5, 11:24 AM14