Filter
Top Products
Filename [SR-VS30EK_4-EN.fm]
Masterpage:Left
74
Page 74 February 1, 2002 2:16 pm
SUBSIDIARY SETTINGS (cont.)
Manual Channel Set
Store channels that were not stored during Auto Set Up
(
੬
pg. 13), Preset Download (
੬
pg. 14) or Auto Channel Set
(
੬
pg. 72).
A
Access the Main Menu screen.
Press
MENU
.
B
Access the Confirmation screen.
Press
rt
to move the highlight bar (pointer) to
“MANUAL CH SET”, then press
OK
or
e
. The
Confirmation screen appears.
C
Select the channel position.
D
Select the band.
E
Input the channel.
Press the
number keys
to input the channel number you
want to store.
●
Input “0” before any single number entries.
●
To input the registered station name (ID –
੬
pg. 78), press
e
until “– – – –” (ID setting) begins blinking, then press
rt
.
●
For fine tuning adjustment, press
e
until “+/–” begins blinking,
then press
rt
. While tuning, “+” or “–” appears.
●
When “L-2 SELECT” is set to “A/V” or “SAT”, the “DECODER”
setting cannot be changed (
੬
pg. 53).
F
Enter new channel information.
Press
OK
and the Confirmation screen appears.
●
Repeat steps
3
–
6
as necessary.
G
Close the Confirmation screen.
Press
MENU
.
●
To change positions, see “Change Station Channel Position”
(
੬
pg. 75).
●
If you wish to set station names other than the ones registered
in your recorder, see “Set Stations (B)” (
੬
pg. 76).
Press
rt
w
e
until an open
position in which you want to
store a channel begins
blinking, then press
OK
. The
Manual Channel Set screen
appears.
(Example) To store in position 6.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
123
456
789
1
2
1
2
3
0
3
4
4
Press
rt
to change the band
between CH (regular) and CC
(cable), then press
e
.
ATTENTION
Guide Program numbers are not set when channels are
stored manually. If an attempt is made at timer programming
with the VIDEO Plus+ system in this state, the “GUIDE
PROG SET” screen appears; set the Guide Program numbers
on this screen. (
੬
pg. 37, “ATTENTION — Guide Program
Number Set”)
Or perform “Guide Program Number Set” (
੬
pg. 82).
CH21
SR-VS30EK_1.book Page 74 Friday, February 1, 2002 2:33 PM