JVC TH-C30 DVD Player User Manual


 
30
4 Press ENTER.
Example:
5 Press Cursor Y/5 to change the
setting.
6 Press ENTER.
The current VFP settings appear again.
7 Repeat steps 3 to 6 to adjust other
parameters.
8 Press VFP.
NOTE
Although the setting display disappears in the middle of the
procedure, the setting at that time will be stored.
7 While stopped
1 Press PLAY MODE
repeatedly until program
window appears on the TV screen.
PRG indicator lights on the display window.
2 Follow the instructions that appear on
the TV screen to program the desired
chapters/tracks.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 20.)
• The content’s numbers that you have to specify for
programming varies depending on the disc/file type:
–DVD VIDEO: Titles and chapters
–VCD, SVCD, CD: Tracks
–DVD AUDIO, MP3, WMA: Groups and tracks
• Before you program the tracks in bonus group on a DVD
AUDIO, perform the procedure of “Playing back a bonus
group” (see page 21) to turn off the BONUS indicator on the
display window.
• You can specify the chapters/tracks whose number is up to
99.
• There may be a case that the group or title number can be
entered even for discs that contain no groups or titles. In such
a case, press ENTER to proceed to the Track/Chapter column.
•When you press
ENTER instead of the number buttons in the
Track/Chapter column, “ALL” appears and all the tracks or
chapters on the selected group or title are programmed as a
step.
To clear the programs one by one from the last entered
number
Press CANCEL repeatedly.
To clear all programs
Press and hold CANCEL.
You can also clear the program by turning off the system.
3 Press 3 (play button).
If all of the programmed tracks/files have been played back,
playback stops and the program window appears again. Note
that program setting remains.
To check the program contents
During playback, press 7. Playback stops and the program window
appears.
To quit the Program mode
While stopped, press PLAY MODE repeatedly until both program
window and disappear from the TV screen.
NOTE
When the source is USB MEMORY, Program Playback does not
work.
There may be a case where bonus group on a DVD AUDIO cannot be
played.
The Resume function cannot be used with Program Playback.
Program Playback may not work for some discs.
Program Playback
Advanced operations
See page 22 for button locations.
TH-C20-30[JC]5.book Page 30 Thursday, January 12, 2006 11:29 AM