JVC TM-1600SU Home Theater Screen User Manual


 
8
VOLUME/SELECT
+
MENUPHASE
PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT
+
EXIT
<SET–UP MENU>
H. POSITION : 00
V. POSITION : 00
WHITE BALANCE
CONTROL LOCK : OFF
B. P. S. LEVEL : 10
REMOTE SELECT : OFF
1
2
3
4
HOW TO USE THE MENU
FUNCTIONS
(cont'd)
DISPLAY AND SELECTIONS IN THE <SET-UP MENU>
MODE (SETTING)
H. POSITION WHITE BALANCE B.P.S. LEVEL
V. POSITION CONTROL LOCK REMOTE SELECT
You can set the following set-up menu items.
1. While pressing the MENU button, press the
PHASE (
) button.
The <SET-UP MENU> screen is displayed.
2. Press the PHASE ( ) or CHROMA ( ) button
to select the desired menu item.
A selection mark (3) is put next to the selected item.
H. POSITION
V. POSITION
WHITE BALANCE
CONTROL LOCK
B.P.S. LEVEL
REMOTE SELECT
3. Press the VOLUME/SELECT button to set.
For the WHITE BALANCE setting, select the CUT OFF or
DRIVE setting screen, then select the buttons (PHASE/
CHROMA/BRIGHT) corresponding to the function indicated
(R/G/B).
Note:
<SET-UP MENU> screen
<Front panel button>
1 Selection mark (
33
33
3): Indicates the
menu item you select.
2 Menu item: Menu items you can
select.
3 Setting display: Indicates the
current settings (value).
4 Function display: The functions of
the front panel buttons (7 buttons on
the left.) correspond to the function
displayed.
Function
Contens
displayed
Advance the menu item.
5 Reverse the menu item.
Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
3 Advance the setting value.
2 Reverse the setting value.
EXIT
Exit the <SET-UP MENU>
screen (release)
DRV Selects DRV adjustment
CUTO
Selects CUT OFF
adjustment
R Adjusts red signal level
G Adjusts green signal level
B Adjusts blue signal level
DISP
Turns the ON-SCREEN
display on or off. (This
function is effective only in
the DRIVE or CUT OFF
adjustment mode.)
Front panel Function
Contents
button displayed
PHASE ( ) Advance selection mark (3)
CHROMA (
) 5 Reverse selection mark (3)
Front panel Function
Contents
button displayed
+ Increase (to max. value)
3 Advance the setting value
CUTO Selects CUT OFF setting
screen
Decrease (to min. value)
2 Reverse the setting value
DRV Selects DRIVE setting screen
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
Parameters for H. POSITION and V. POSITION can be set separately depending on
the video input (Input A (VIDEO), Input B (VIDEO) or Input B (Y/C)) selected by the
input select buttons on the front panel.
Select the required video input with the input select buttons on the front panel in
advance.
WHITE BALANCE can be set individually at 6500 or 9300 for the color temperature
value.
Set COLOR TEMP. to the value 6500 or 9300 in the <MENU> screen in advance.
Notes:
PHASE CHROMA