Filter
Top Products
8
VOLUME/SELECT
– +
MENUPHASE
PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT
– +
EXIT
<SET–UP MENU>
‰ H. POSITION : 00
V. POSITION : 00
WHITE BALANCE
CONTROL LOCK : OFF
B. P. S. LEVEL : 10
REMOTE SELECT : OFF
1
2
3
4
HOW TO USE THE MENU
FUNCTIONS
(cont'd)
DISPLAY AND SELECTIONS IN THE <SET-UP MENU>
MODE (SETTING)
● H. POSITION ● WHITE BALANCE ● B.P.S. LEVEL
● V. POSITION ● CONTROL LOCK ● REMOTE SELECT
You can set the following set-up menu items.
1. While pressing the MENU button, press the
PHASE (
) button.
The <SET-UP MENU> screen is displayed.
2. Press the PHASE ( ) or CHROMA ( ) button
to select the desired menu item.
A selection mark (3) is put next to the selected item.
H. POSITION
V. POSITION
WHITE BALANCE
CONTROL LOCK
B.P.S. LEVEL
REMOTE SELECT
3. Press the VOLUME/SELECT button to set.
● For the WHITE BALANCE setting, select the CUT OFF or
DRIVE setting screen, then select the buttons (PHASE/
CHROMA/BRIGHT) corresponding to the function indicated
(R/G/B).
Note:
<SET-UP MENU> screen
<Front panel button>
1 Selection mark (
33
33
3): Indicates the
menu item you select.
2 Menu item: Menu items you can
select.
3 Setting display: Indicates the
current settings (value).
4 Function display: The functions of
the front panel buttons (7 buttons on
the left.) correspond to the function
displayed.
Function
Contens
displayed
∞ Advance the menu item.
5 Reverse the menu item.
– Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
3 Advance the setting value.
2 Reverse the setting value.
EXIT
Exit the <SET-UP MENU>
screen (release)
DRV Selects DRV adjustment
CUTO
Selects CUT OFF
adjustment
R Adjusts red signal level
G Adjusts green signal level
B Adjusts blue signal level
DISP
Turns the ON-SCREEN
display on or off. (This
function is effective only in
the DRIVE or CUT OFF
adjustment mode.)
Front panel Function
Contents
button displayed
PHASE ( ) ∞ Advance selection mark (3)
CHROMA (
) 5 Reverse selection mark (3)
Front panel Function
Contents
button displayed
+ Increase (to max. value)
3 Advance the setting value
CUTO Selects CUT OFF setting
screen
– Decrease (to min. value)
2 Reverse the setting value
DRV Selects DRIVE setting screen
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
● Parameters for H. POSITION and V. POSITION can be set separately depending on
the video input (Input A (VIDEO), Input B (VIDEO) or Input B (Y/C)) selected by the
input select buttons on the front panel.
Select the required video input with the input select buttons on the front panel in
advance.
● WHITE BALANCE can be set individually at 6500 or 9300 for the color temperature
value.
Set COLOR TEMP. to the value 6500 or 9300 in the <MENU> screen in advance.
Notes:
PHASE CHROMA