Filter
Top Products
ENGLISH
Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO A
terminals @.
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
Video B terminals [VIDEO B IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO B
terminals #.
* Also refer to BASIC CONNECTION EXAMPLE on
page 12.
Audio A terminals [AUDIO A IN/OUT]
Input (IN) and output (OUT) terminals for the audio signal
corresponding to the VIDEO A terminals 0.
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO A
terminal 0.
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
REAR VIEW
<Rear Panel>
10
11
12
13
14
5
VIDEO A
VIDEO B
AUDIO A
AUDIO B
REMOTE
OUTIN
OUTIN
OUT
OUT
ASPECTINPUT
IN
IN
VIDEO A
VIDEO B
AUDIO A
AUDIO B
REMOTE
OUTIN
OUTIN
OUT
OUT
ASPECTINPUT
IN
IN
10
11
12
13
14
Audio B terminals [AUDIO B IN/OUT]
Input (IN) and output (OUT) terminals for the audio
signals corresponding to the VIDEO B terminals ! .
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO B
terminals !.
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
Remote terminals
[REMOTE INPUT, ASPECT]
Remote terminals for external control. Selecting VIDEO A
or VIDEO B and ASPECT RATIO is available via external
control. External control is set in the <SET-UP MENU>
screen.
To use external control, you must build a switch cable
and connect it to the REMOTE terminals.
Note:
● Also refer to BASIC CONNECTION EXAMPLE on
page 12.
External control switch
Open circuit Closed circuit
(open) (short)
ASPECT RATIO 4–3 (4:3) 16–9 (16:9)
INPUT INPUT A INPUT B
External control
functions
EN_LCT1024-001C-H.pm6 03.8.28, 6:54 PM5