20 EN
12 3
4
0
6
78
5
9
1
4
3
2
OK
NUMBER
SHOWVIEW
12345678
[0 – 9] =
[CANCEL] : DELETE
[PROG] : EXIT
ACCESS SHOWVIEW
SCREEN
1
Press PROG..
ENTER SHOWVIEW
NUMBER
2
Press the NUMBER keys to
enter the SHOWVIEW
number of a programme
you wish to record.
● If you make a mistake,
press CANCEL and input
the correct number.
ACCESS SHOWVIEW
PROGRAM SCREEN
3
Press OK, and the
S
HOWVIEW Program screen
appears (if you’re just
starting out, “P1” appears).
IMPORTANT
Make sure the channel position number you wish
to record is displayed; if not, see "SHOWVIEW Setup"
on page 18 and set the Guide Program number for
that SHOWVIEW number correctly.
● If the number you entered is invalid, "ERROR" appears
on the screen. Press CANCEL and input a valid
SHOWVIEW number.
● If the "GUIDE PROG SET" screen appears, see
"ATTENTION – Regarding Guide Program Number
Set" on page 21.
SET TAPE SPEED
4
Press SP/LP/EP ( ) to set the tape speed.
– P1 –
SHOWVIEW 123456789
START STOP
21:00 = 22:00
SP
DATE TV PROG
25.12 1
: OK
SHOWVIEW
Timer
Programming
Before performing SHOWVIEW Timer Programming:
● Be sure to read "SHOWVIEW Setup" (੬ pg. 18).
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
With SHOWVIEW, timer programming is greatly simplified
because each TV programme has a corresponding code number
which your recorder is able to recognise.
TIMER RECORDING (cont.)
SHOWVIEW
[0 – 9] =
[+/–] : EXPRESS PROGRAMING
[PROG] : EXIT
CANCEL
PROG.
SP/LP/EP
