Filter
Top Products
14 EN
Index Search
Index codes are placed on the tape at the start of each
recording. You can find and automatically play back from the
start of any recording using the Index Search function.
START SEARCH
1
While the tape is stopped, press ™ or £ ( or ).
ACCESS DISTANT CODE
2
To access a recording 2–9 index codes away, press ™
or £ ( or ) repeatedly until the correct number is
displayed on screen (only if SUPERIMPOSE is set to ON
(੬ pg. 18). Playback begins automatically when the
desired recording is located.
● If necessary press REW or FF when play starts to
search visually to find the very beginning of the
desired program.
NOTE:
An index code is not placed on the tape when recording is
paused and then resumed.
fi
%
PLAYBACK AND RECORDING FEATURES
Playback
Features
12 3
45
0
6
789
1
2
4
3
CH
PLAY
PAUSE
Still Picture/Frame-By-
Frame Playback
PAUSE DURING PLAYBACK
1
Press PAUSE. If there is vertical jitter, use the CH 5 or
∞
button to correct the picture.
ACTIVATE FRAME-BY-
FRAME PLAYBACK
2
Press PAUSE repeatedly to advance one frame at a time.
● Reverse frame-by-frame playback is not possible with
this recorder.
To resume normal playback, press PLAY.
Slow Motion
ACTIVATE SLOW-MOTION
PLAYBACK
1
For forward slow motion during still picture, press and
hold PAUSE for more than 2 seconds. Press PAUSE
again to return to still picture.
● Reverse slow motion is not possible with this
recorder.
To resume normal playback, press PLAY.
CH
PAUSE
fi
%
High-Speed Search
ACTIVATE HIGH-SPEED
SEARCH
1
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
To resume normal playback, press PLAY.
NOTE:
For short searches, during playback or still, press and hold FF or
REW for over 2 seconds. When released, normal playback
resumes.
FF
PLAY
REW
REW
FF