Filter
Top Products
20
1
2
3
46
7
8
5
0
9
3
¶
4¢
78
1
•• ••
¡
COUNT 0:33:27
Tape Position Indicator
The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW or
perform an Index Search or Instant
ReView. The position of " " in
relation to "B" (Beginning) or "E"
(End) shows you where you are on
the tape.
NOTE:
SUPERIMPOSE must be set to ON, or the indicator will not
appear (
੬
pg. 17).
BE
+++
PLAYBACK AND RECORDING FEATURES (cont.)
£
™
q
5
/
8
2
3
Next Function Memory
You can set your VCR's power to go off automatically after the
tape is fully rewound. Before starting, make sure the VCR is in
the Stop mode.
For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds.
NOTE:
If you want the power to be turned off automatically when the
counter reads “0
H
00
M
00
S
” (instead of at the beginning of the
tape), press C.MEMORY so that the “M” mark appears before
pressing REW.
MAKE CONNECTION
1
Connect your VCR to an AV COMPU LINK component
as shown in the illustration on page 21.
• The Mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
TURN ON THE VCR
2
Press POWER.
ACCESS MAIN MENU
SCREEN
3
Press MENU.
AV COMPU LINK Playback
(HR-J6004UM only)
Your VCR is compatible with JVC’s AV COMPU LINK components,
including amplifiers (or receivers) and televisions. AV COMPU
LINK provides one touch control of the audio and video compo-
nents that are linked via their AV COMPU LINK connectors.
For example: simply load a cassette in the VCR and press PLAY
and the AV COMPU LINK components automatically power on,
the TV's VIDEO mode is selected and the VCR goes into play
mode. (PLAY need not be pressed if the cassette's record safety
tab is removed.)
POWER
REW
FF
MENU
C.MEMORY
FF
REW
MENU
POWER