Filter
Top Products
Preliminary knowledge
11
Preliminary
knowledge
For XV-S400BK/XV-S402SL
For XV-S300BK/XV-S302SL
Rear panel
1 DIGITAL OUT jack (OPTICAL/COAXIAL) (18)
Outputs digital audio signals. Both coaxical and optical
connectors are provided. You must select the signal type
correctly according to the external device connected to
via the Preference display.
2 COMPONENT VIDEO OUT jacks (Y/P
B
/P
R
) (17)
Output component video signals.
To enable these jacks, select VIDEO OUT SELECT
(COMPONENT/S-VIDEO) switch to “COMPONENT AND
VIDEO”.
3 S-VIDEO OUT jack (16)
Outputs a S-video signal.
To enable this jack, select VIDEO OUT SELECT
(COMPONENT/S-VIDEO) switch to “S-VIDEO AND VIDEO”.
4 VIDEO OUT jack (16)
Outputs a composite video signal.
This jack is enabled regardless of VIDEO OUT SELECT
(COMPONENT/S-VIDEO) switch position.
5 AUDIO OUT jacks (LEFT/RIGHT) (16, 17)
Outputs stereo analog audio signals.
6
VIDEO OUT SELECT switch (COMPONENT/S-VIDEO) (16)
Select “COMPONENT AND VIDEO” or “S-VIDEO AND
VIDEO”.
Note that you must change the switch position while
the unit is stopped, or the unit power is off.
Otherwise, the changed setting will not be effective.
7 AV COMPU LINK jacks (52)
Connects with other JVC equipment supporting the AV
Compulink function to facilitate integrated operations.
8 AC IN connector (19)
Connects to the wall outlet using the suppplied AC power
cord.
9 Region Code label (15)
Shows Region Code number.
1 DIGITAL OUT jack (COAXIAL) (18)
Outputs digital audio signals. You must select the type
correctly according to the external device connected to
via the Preference display.
2 COMPONENT VIDEO OUT jacks (Y/P
B
/P
R
) (17)
Output component video signals.
To enable these jacks, select VIDEO OUT SELECT
(COMPONENT/S-VIDEO) switch to “COMPONENT”.
3 S-VIDEO OUT jack (16)
Outputs a S-video signal.
To enable this jack, select VIDEO OUT SELECT
(COMPONENT/S-VIDEO) switch to “S-VIDEO
AND VIDEO
”.
4 VIDEO OUT jack (16)
Outputs a composite video signal.
To enable this jack, select VIDEO OUT SELECT
(COMPONENT/S-VIDEO) switch to “S-VIDEO AND VIDEO”.
5 AUDIO OUT jacks (LEFT/RIGHT) (16, 17)
Outputs stereo analog audio signals.
6
VIDEO OUT SELECT switch (COMPONENT/S-VIDEO) (16)
Select “COMPONENT or “S-VIDEO AND VIDEO”.
Note that you must change the switch position while
the unit is stopped, or the unit power is off.
Otherwise, the changed setting will not be effective.
7 AC IN connector (19)
Connects to the wall outlet using the suppplied AC power
cord.
8 Region Code label (15)
Shows Region Code number.
12
56 78439
1
PCM / STREAM
COAXIAL
COMPONENT
S-VIDEO VIDEO
RIGHT LEFT
YP
B PR
OPTICAL
AC IN
S-VIDEO
AND
VIDEO
COMPONENT
AND
VIDEO
DIGITAL OUT VIDEO OUT
AUDIO OUT
AV COMPU LINK
VIDEO OUT SELECT
12
56 7843
1
PCM / STREAM
COAXIAL
COMPONENT
S-VIDEO VIDEO
RIGHT LEFT
YP
B PR
AC IN
S-VIDEO
AND
VIDEO
COMPONENT
DIGITAL OUT VIDEO OUT
AUDIO OUT
VIDEO OUT SELECT
%RG\B(QJIP3DJH:HGQHVGD\'HFHPEHU30