Filter
Top Products
5
Preliminary
knowledge
English
Preliminary knowledge
Names of parts and controls
Refer to the corresponding pages indicated in () for details.
Front panel
1 STANDBY indicator (21)
Lights in red when the power cord is connected and
the unit is on standby. When the unit is turned on,
the STANDBY indicator goes off.
2 STANDBY/ON button (21)
Turns the unit on or off (standby).
3
Remote sensor
Receives signals from the remote control unit.
4 Disc tray (21)
Used to load a disc.
5 0
(OPEN/CLOSE) button (21)
Used to open and close the disc tray.
6 PROGRESSIVE indicator (15)
Lights up when the Progressive scan mode is active.
It lights in green during playback of a film-source DVD
VIDEO disc when “PROGRESSIVE MODE” in
“PREFERENCE 1” is set to “SMART”, “FILM” or “AUTO.”
In other conditions when the Progressive scan mode is
active, it lights in red.
7 Display window (8)
Indicates the current status of the unit.
8 4
/
¢
(SKIP) buttons (23, 41)
Used to skip a chapter, title or track. Also, used for
the page selection of a menu screen (for Video CD).
Holding down 4 or ¢ during playback reverses or
advances playback rapidly (except MP3 disc).
9 7
(STOP) button (22, 41)
Stops playback.
0 3
(PLAY) button (22, 41)
Starts playback. Also, used as a SELECT button for
PBC of Video CDs.
- 8
(PAUSE) button (22, 41)
Pauses playback. Also, used to display
nine continuous still pictures (STROBE function).
STANDBY
STANDBY/ON
PROGRESSIVE
DVD/VIDEO CD/CD
PAUSEPLAYSTOP
SKIP
OPEN/CLOSE
387
0
¢4
DVD/CD PLAYER
1 STANDBY indicator 3 Remote sensor 5 0 (OPEN/CLOSE) button
2 STANDBY/ON
button
4 Disc tray
7 Display window
6 PROGRESSIVE indicator
- 8 (PAUSE) button
0 3 (PLAY) button
9 7 (STOP) button
8 4/¢ (SKIP) buttons
6(1*ERRN3DJH:HGQHVGD\0D\30