Filter
Top Products
Playback
23
NOTE
• You can change the time information mode. (A pg. 36)
• You can also check the playback information on the TV screen.
(A pg. 35)
7 Disc information on the display window
The disc indicators on the display window show the current status
of the corresponding disc tray.
Example:When the discs are loaded to disc trays 1, 2 and 5, and the
disc in the disc tray 5 is selected.
NOTE
When loading a disc;
• Only after a DISC button is pressed the system starts reading the
information of the disc on the specified tray. After that, the disc
indicators show the current disc status correctly.
7 Tray lock
You can lock trays and prohibit the unwanted disc ejection by
children.
On the center unit ONLY:
While the system is turned off
Press and hold 7, then press 0 for DISC 1.
• The system turns on and “LOCKED” appears on the display
window.
• If you try to eject discs, “LOCKED” appears and indicates that
trays are locked.
To unlock trays
When the system is turned off, press and hold 7, then press 0 for
DISC 1.
• The system turns on and “UNLOCKED” appears on the display
window.
IMPORTANT
Before using the remote control for the following
operation;
1 Set the remote control mode selector to
AUDIO.
2 Press DVD.
One Touch Replay
You can move back the playback position by 10 seconds
from the current position.
7 During playback
On the remote control:
Press .
NOTE
• This function works between chapters in the same title.
• This function may not work for some DVDs.
Currently selected disc
number ( appears beside
the disc number)
Currently loaded disc numbers
Playback features
Number
buttons
(play button)
Remote control
mode selector
TH-M45[B].book Page 23 Wednesday, April 2, 2003 12:52 PM