Kathrein UFC 762si Satellite TV System User Manual


 
31
AUTOMATIC SEARCH
SEARCH FOR CHANNELS
The frequencies and
symbol rates, and the
channels available,
may be different for
different cable network operators.
So as to keep the search time as
short as possible, you can ask
your cable network provider in
advance for information on which
programmes are transmitted on
which frequencies and channels
and with which symbol rates,
and then set up the search
accordingly.
Use the

buttons to select the start frequency for the search.
Press the

buttons to access the next line.
Use the

buttons to select the end frequency for the search.
Press the

buttons to access the next line. If necessary you can input further symbol rates at this point,
using the numeric pad buttons on the remote control.
Press the

buttons to access the next line. Use the

buttons to perform the settings for the
channels to search for. You can select from “All”, “Only encrypted” and “Only free to air”.
Press the

buttons to access the next line. Press the
button to start scanning for channels.