Kathrein UFD 420 Satellite TV System User Manual


 
Receiver operation
17
Functional sequence:
Press keys VCR display TV display
P 010 P.003
P.010 P 003
P 010 r.001
P.010 r 001
r 005 r.001
r.005 r 001 etc.
Displaying programme overview
The unit is in normal mode (TV or radio mode).
Press the
key.
The programme overview appears on the screen.
The currently selected programme is identified by
<..>
.
The
keys can be used to single-step through the programme list while the
keys allow paging in steps of 10.
Pressing the
key once results in switchover to the marked programme. On
exiting the programme overview with
key, there is a switch back to the pre-
vious programme.
Pressing the
key twice results in switchover to the marked programme and
exit from the programme overview.
To exit from the menu without selecting a programme press key
.
Info menu
Press the
key whilst the programme list is overlaid.
The Info menu appears with instructions for calling up the setup menus for the ini-
tial setup, video and audio setup and radio settings.
Exit from the menu with keys
,
or
.
Stop-watch
By pressing the
key you can start a stop-watch. A further pressing of the key
removes the stop-watch from the display again.
The unit is in normal mode (TV or radio mode).