Filter
Top Products
24
FIRST INSTALLATION: Single-cable system (Manual)
If no connection to the single-cable system could be established, the following display appears:
Check your settings (frequency and transmission channel) and if necessary call for expert help.
Press the
button to acknowledge this display.
Then press the
button. You will be asked whether
you wish to save the changes. Use the
buttons
to select “Yes, save changes” and confi rm by pressing
the
button. Now press the
!
(green) button.
The receiver will automatically display the selection menu for the channel search. Continue by selecting
the item (Execute Channel search).
Test connection
When you have completed all the settings, press the
buttons to switch to the “Test connection”
selection fi eld and press the
button. The receiver now tests whether a connection to the single-cable
system can be established or not. As soon as the receiver has established a connection to the single-cable
system, you will see the following display: