Filter
Top Products
20
FIRST INSTALLATION: Single-cable system
Use the
buttons here to select “One Cable” as the “System”. Press the
button to move to the
next menu item. The following display appears:
Number of Satellites
Use the
buttons to select how many satellites (max. 2) you would like to receive with your reception
system. Press the
button to move to the next menu item.
Confi gure satellites
Press the
button to call up the menu. The following display appears:
Satellite and Position
Use the
buttons to select the fi rst satellite (satellite 1 of 2, depending on the setting) as shown on the
screen.
LNB Type
Here use the
buttons to select the LNB type used in your system. The choice is between “Universal”,
“Wideband” and “User-defi ned”.
If in your reception system you use a single-cable LNB (e.g. UAS 481 from Kathrein), please select here
the setting “Wideband”. If you use a single-cable matrix (EXU 908) or a single-cable switching matrix
(EXR 501, 551, 552, 1581 or 2581) from Kathrein, the LNB you use must be a “Universal LNB”!
The various options for a
single-cable system with
Kathrein components are
summarised at the end of
this manual in the “Technical
Appendix” section under
“Examples of single-cable
systems”.