Filter
Top Products
22
FIRST INSTALLATION: Single-cable system (Automatic)
The receiver searches for the transmission channels
on your single-cable system and shows in the next
display the available transmission channels.
Use the
buttons to select the transmission
channel you want and confi rm the selection with
the
button.
The receiver now reads the existing system data
for your single-cable system and confi gures itself.
The receiver has been successfully registered
on your single-cable system. Confi rm the display
with the
button. Now press the
!
(green)
button. The receiver automatically displays
the selection menu for the channel search.
Continue by selecting the item (Execute Channel
search).
If no connection to the single-cable system could be established, you will receive the message
“Registration was abortive!”. Check your settings and if necessary call for expert help.
If one or more receivers are already present on the system and an additional
receiver is to be connected, when assigning the transmission frequency the
new receiver make sure that no transmission frequencies are duplicated.
No frequency can be used by more than one receiver.
No frequency can be used by more
than one receiver.
The receivers would interfere with
each other.