Filter
Top Products
24
Calling this up displays the channel selection/sorting list from which you selected the last channel.
At the top right you will see the selected channel list (TV or radio channels) displayed.
Press the
#
(blue) button to switch between the TV and radio channel lists.
To the right of it you see the current channel list sort order as selected by you.
“Weak or no signal” indicates that an error has occurred in the reception system or in the receiver settings,
or that the transponder is not sending.
Check the Sat IF connection and the LNB confi guration. If you have changed settings, compare them
against the basic settings (provided you had made a note of them as suggested).
ERROR SIGNALLING
CHANNEL LIST - TV/RADIO
ON-SCREEN DISPLAYS (OSD)
Also pay attention to the bars
at the bottom of the on-screen
display! This provides hints on
what to do next.
Press the
button to access the channel list.