Filter
Top Products
DVF-3200/DVF-3250 (EN/K,E,X)
Set Up functions
16
Preparations
LANGUAGE
Menu Language
Select a language for the Setup menu and on-screen
display.
Disc Audio/ Disc Subtitle/ Disc Menu
Select the language you prefer for the audio Track (disc
audio), subtitles, and the disc menu
Original:
Refers to the original language in which the
disc was recorded.
Other:
To select another language, press number but-
tons then ENTER key to enter the corresponding digit
number according to the language code list in the refer-
ence chapter. If You enter the wrong Language code,
press CLEAR key. )
DISPLAY
TV Aspect
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide Picture on the
entire screen and cuts off the portions that do not fit.
Progressive Scan
When ON is selected, the confirmation screen for switch-
ing to Progressive Scan appears.
In case of a TV not compatible with Progressive Scan, the
screen disappears and return to the original display is
made after 10 seconds.
TV Output Select (only for Europe)
Set the player's TV Output Select options according to
the TV connection type.
RGB: When your TV is connected with the SCART jack.
Y Cb Cr: When your TV is connected with the COMPO-
NENT VIDEO jacks on the DVD player.
*5547/15-20/EN 05.1.24, 2:58 PM16