Filter
Top Products
47
DVT-6200 (EN/K,E,X)
Operations
Program play
You can listen to the desired tracks of the current CD or VCD in any desired order.
Program Edit
1 During stop mode, press the PGM key on the
remote.
Program edit screen appears.
4 You can select maximum 21 values by repeating
step 2 - 3.
5 Select "PLAY" icon on the screen. then press
the ENTER key to start program play.
÷ MP3/JPEG discs can not be programmed with this program
mode. (MP3/JPEG program playback
T)
÷ The unit stops when the STOP (7) key is pressed. To restart
program play, press the PGM key, display the program
screen, select the "PLAY" icon, and press the ENTER key.
Note
Note
Note
"ADD" icon : Add value onto "PROGRAM LIST"
"DELETE" icon: Delete value from "PROGRAM LIST"
"INSERT" icon : Insert value in "PROGRAM LIST"
"PLAY" icon : Play program play
"CLEAR" icon:When this icon is selected and the ENTER
key is pressed, the entire contents of the
PROGRAM LIST will be deleted, and the
Program edit screen also will disappear.
2 Select specific track by Press Cursor up/down
(5/∞) keys.
3 Select "ADD" icon on the screen to register
selected value onto PROGRAM LIST, then
press the ENTER key.
To repeat program play
During program playback, press the REPEAT
key on the remote.
Each press the key switches the mode.
1 "REPEAT ONE"
2 "REPEAT ALL"
3 "REPEAT OFF"
01
ADD
DELETE
PLAY
CLEAR
TRACK
PROGRAM LIST
[12]
SET TRACK VALUE
Track No.
Program list
Number of tracks
recorded on the disc.
03.7.8, 11:02 AMPage 47