Filter
Top Products
22
|
English
1
..........1
2
..........1
3
..........2
4
..........4
5
..........4
6
..........2
7
..........1
Accessories Installation
Bracket 3
Tapping Screw 5
Semusu Screw 4
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
• Do not install the unit to an unatable place and a place
where it vibrates.
• You can mount the unit at any angle between the
regular horizontal position and the vertical position on
its back (0° through 90°). You cannot mount the unit with
the disc slot facing downwards, angled or upside down.
Installation using the Brackets
Installation using the velcro tapes
Velcro tape 6
Carpet
• If the fuse blows, first make sure that the wires have not
caused a short circuit, then replace the old fuse with one
with the same rating.