Filter
Top Products
15
Operations
DV-503/DVF-3550 (EN/K,P,T,M,X)
TITLE
TRACK
CHAP
HOUR
MIN
SEC
DVD
CD
VCD
MP3
AB
Playback of disc
Basic play
Preparation
÷ set the POWER ON/OFF switch to the ON ( )
position.
÷ After switching the power ON, there is a delay of
approx. 3 seconds until the display is lit.
POWER
ON OFF
Load a disc
1
MAIN UNIT
0
1Open the tray.
2Place a disc.
3Close the tray.
POWER
0
7
4
¢
1
¡
6
Label side
÷ When the key is pressed, the tray opens.
When the key is pressed again, the tray closes. When the
PLAY/PAUSE key is pressed while a tray is open, the tray
closes automatically, and then playback begins.
Start playback
2
MAIN UNIT REMOTE
6
TITLE No. (DVD)
CHAPTER No. (DVD)
TRACK No. (CD)
Time display
To stop playback
MAIN UNIT
REMOTE
7
When a Disc Menu appears on the screen
In case of interactive DVDs, a Disc Menu appears on the screen.
Then press ENTER to select specific menu you want to play by using
Cursor keys.
÷ Each press pauses and plays the disc alternately.
RESUME playback
When a menu screen is recorded on the
disc, the menu screen will be displayed
when the TOP MENU key is pressed. At
the menu screen, the menu can be se-
lected by pressing the Cursor keys.
When the STOP key has been pressed once during
playback to stop the playback, and then playback is
started again, play will start from the point where
the playback had been stopped. This is called the
RESUME function. When the STOP key is pressed
again during stop, the RESUME function is can-
celled.
RESUME is cancelled when 5 minutes have passed in
RESUME status.
POWER
0
76
POWER ON/ OFF switch
6 (PLAY/
PAUSE) key
7 (Stop) key
7 (Stop) key
0 (open/close) key
6 (Play/Pause) key
TOP MENU
key
TOP MENU
6
7