Filter
Top Products
English 35
Calibration
This function allows you to correct any error in the position or direction of your vehicle display.
■ Adjusting Current Position and Direction
1
Select .
2
Move to the correct position and select .
3
Use or to adjust direction in which you are
heading, and select .
■ Distance
This function automatically corrects any error in the display of the current position that might
occur after tyre replacement.
1
Select .
You will have to drive about 6 miles (10km) before distance correction is complete.
3 (Navigation Set Up) 3 (Calibration)
Before Steps
3 (Navigation Set Up) 3 (Calibration)
Before Steps
KNA-DV3200(E)_ENG r2.1 04.7.23 4:32 PM Page 35