Filter
Top Products
68
|
English
Control during DVD Video or Video CD Playback
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (page 78)
4 Calls the Setup Menu.
5 Selects a navigation system connection. (
RGB)
"RGB": Allows the Kenwood’s Navigation System
to connect via its interface cable.
"AV-IN1": Allows a third-party navigation system to
connect via the AV INPUT1 port.
"Off": Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
6 Sets a name to be displayed when you select a
system that is connected via the AV INPUT1 port.
( VIDEO1)
• If you have set the navigation system connection to "AV IN1",
the display is fixed to "NAV".
7 Sets an image display of the system that is
connected via the AV INPUT2 port. *
1
( Off)
"Off": When the image source is switched, an
image entered via the AV INPUT2 port is
displayed.
"On": When an image signal is entered via the AV
INPUT2 port, this image is displayed.
8 Sets a name to be displayed when you select an
image of the system that is connected via the
AV INPUT2 port. (
VIDEO2) (Function of KVT-
617DVD)
9 Displays the AV I/F 2 screen.
• If is not shown, touch
or to display it.
•
*
1
This function can be used for AV INPUT1. (KVT-647DVD)
AV Interface
You can set audio and visual (AV) interface parameters. <KVT-647DVD : AV INPUT1 only>
Displaying the AV I/F 1 screen
AV I/F 1 screen
On
1
2
3
6
5
7
5
6
9
1
1
1
4
88