Filter
Top Products
8
EN
Selecting the Color System (MODE)
You can select one of the following modes for the Color system.
AUTO: Automatically selects PAL or NTSC according to the video signal received.
PAL: Sets PAL for the Color system.
NTSC: Sets NTSC for the Color system.
1 Press the MENU button to select “MODE”.
2 Press the MENU SET 5/∞ button to select the Color system.
Each time you press the button, the setting changes as follows:
AUTO PALMODE
NTSC
AUTO PALMODE
NTSC
AUTO PALMODE
NTSC
Selects AUTO. Selects PAL. Selects NTSC.
Setting COLOR/TINT/PICTURE
You can make the following adjustments in each menu item.
COLOR: Depth of color
TINT: Tint
PICTURE: Picture quality
1 Press the MENU button and select “COLOR”, “TINT” or “PICTURE”.
2 Press the MENU SET 5/∞ button to adjust each of them.
Each time you press the button, the value changes in the range 0 to 100.
[Color adjustment sample]
COLOR 82
TINT
PICTURE
50
50
Initial Resetting
You can get the menu settings back to state at the time you purchased the system.
While pressing the MENU button, turn on the POWER switch.
MENU
POWER
OFF ON
+
Setting the Menu (Continued)