Filter
Top Products
17
You may adjust speaker volume balance and delay time according to your listening position.
Speaker setup
D
F
D
C
D
R
D
R
D
F
It is hopeful that the interval from the listener to each
speakers is same to get the best sound quality. If not,
you can adjust the delay time so that the sounds from
speakers will arrive simultaneously to the listener.
Centre speaker
Front Right speaker
Front Left speaker
Rear Left speaker Rear Right speaker
Centre Delay
If the distance of DC is equal or longer than DF, set
the delay time to “0ms” using
BB
BB
B or
AA
AA
A.
If the distance of DC is shorter than DF, set the Cen-
tre Delay time using
BB
BB
B or
AA
AA
A as follows.
DF – DC Setting
30cm (approx.) 1ms
60cm (approx.) 2ms
90cm (approx.) 3ms
120cm (approx.) 4ms
150cm (approx.) 5ms
Surround Delay
If the distance of DR is equal or longer than DF, set
the delay time to “0ms” using
BB
BB
B or
AA
AA
A.
If the distance of DR is shorter than DF, set the Sur-
round Delay time using
BB
BB
B or
AA
AA
A as follows.
DF – DR Setting
150cm (approx.) 5ms
300cm (approx.) 10ms
450cm (approx.) 15ms
Volume
Test Tone
Set
Off
Centre Delay 0ms
Surround Delay 0ms
Tone Bass Boost Surround SPKR Setup
BACD/Enter/Return
Volume
Test Tone
Set
Off
Centre Delay 0ms
Surround Delay 0ms
BACD/Enter/Return
Tone Bass Boost Surround SPKR Setup
Press SPKR SETUP in DVD mode.
The “SPKR Setup” screen appears.
Press
CC
CC
C or
DD
DD
D to select “Volume”, “Test Tone”, “Centre
Delay” or “Surround Delay”.
Volume
You can adjust the volume level of each speaker.
1. Press ENTER or
AA
AA
A. The “Volume” screen appears.
2. Press
BB
BB
B or
AA
AA
A to select the desired speaker.
3. Press
CC
CC
C or
DD
DD
D to adjust the volume level as desired
(“0” ~ “–10”).
4. Repeat steps 2 ~ 3 for other speakers.
5. Press SPKR SETUP or RETURN to close the
“SPKR Setup” screen.
You can also adjust the volume level of each speaker
in FM/AM or external input mode as follows.
1. Press SPKR SETUP. The setting display appears
on the display windows.
2. Press
CC
CC
C or
DD
DD
D to select the desired speaker.
3. Press
BB
BB
B or
AA
AA
A to adjust the volume level as desired
(“0” ~ “–10”).
4. If adjusting is complete, press SPKR SETUP or
ENTER.
Test Tone
You can adjust the sound balance of the speakers.
1. Press ENTER or
AA
AA
A. The “Test Tone” screen ap-
pears. The test tone comes out for 3 seconds from
each speakers in the following order.
Front Left Centre Front Right Rear Right
Rear Left Sub Woofer Front Left ...
2. If the test tone balance is not kept, press
CC
CC
C or
DD
DD
D to
adjust the volume level as desired (“0” ~ “–10”)
while the desired speaker is activating.
3. Repeat step 2 for other speakers.
4. Press SPKR SETUP or RETURN to close the
“SPKR Setup” screen.
Volume
Test Tone
Set
Off
Centre Delay 0ms
Surround Delay 0ms
BACD/Enter/Return
Tone Bass Boost Surround SPKR Setup
Volume
Test Tone
Set
Off
Centre Delay 0ms
Surround Delay 0ms B Front Left A
Vol.00BACD/Enter/Return
Tone Bass Boost Surround SPKR Setup
Volume
Test Tone
Set
On
Centre Delay 0ms
Surround Delay 0ms Front Left
Vol.00BACD/Enter/Return
Tone Bass Boost Surround SPKR Setup
Press SPKR SETUP or RETURN to close the “SPKR
Setup” screen.
2D20401A P16-23 26/9/03, 6:02 PM17